28 #include "ns3/double.h"
29 #include "ns3/string.h"
32 #include "ns3/traced-callback.h"
33 #include "ns3/trace-source-accessor.h"
34 #include "ns3/simulator.h"
80 NS_LOG_WARN (
"Calculating SINR for unsupported modulation type");
83 double intKp = -
DbToKp (rxPowerDb);
84 UanTransducer::ArrivalList::const_iterator it = arrivalList.begin ();
85 for (; it != arrivalList.end (); it++)
88 if (std::abs ( (
double) it->GetTxMode ().GetCenterFreqHz () - (
double) mode.
GetCenterFreqHz ())
89 < (
double)(it->GetTxMode ().GetBandwidthHz () / 2 + mode.
GetBandwidthHz () / 2) - 0.5)
96 it->GetPacket ()->PeekHeader (ch2);
103 << mode.
GetName () <<
" Int mode: " << it->GetTxMode ().GetName () <<
" Separation: "
104 << std::abs ( (
double) it->GetTxMode ().GetCenterFreqHz () - (
double) mode.
GetCenterFreqHz ())
105 <<
" Combined bandwidths: " << (
double)(it->GetTxMode ().GetBandwidthHz () / 2 + mode.
GetBandwidthHz () / 2) - 0.5);
108 intKp +=
DbToKp (it->GetRxPowerDb ());
112 double totalIntDb =
KpToDb (intKp +
DbToKp (ambNoiseDb));
114 NS_LOG_DEBUG (
Now ().As (
Time::S) <<
" Calculating SINR: RxPower = " << rxPowerDb <<
" dB. Number of interferers = " << arrivalList.size () <<
" Interference + noise power = " << totalIntDb <<
" dB. SINR = " << rxPowerDb - totalIntDb <<
" dB.");
115 return rxPowerDb - totalIntDb;
122 m_phy1 = CreateObject<UanPhyGen> ();
123 m_phy2 = CreateObject<UanPhyGen> ();
163 .SetGroupName (
"Uan")
165 .AddAttribute (
"CcaThresholdPhy1",
166 "Aggregate energy of incoming signals to move to CCA Busy state dB of Phy1.",
169 MakeDoubleChecker<double> ())
170 .AddAttribute (
"CcaThresholdPhy2",
171 "Aggregate energy of incoming signals to move to CCA Busy state dB of Phy2.",
174 MakeDoubleChecker<double> ())
175 .AddAttribute (
"TxPowerPhy1",
176 "Transmission output power in dB of Phy1.",
179 MakeDoubleChecker<double> ())
180 .AddAttribute (
"TxPowerPhy2",
181 "Transmission output power in dB of Phy2.",
184 MakeDoubleChecker<double> ())
185 .AddAttribute (
"SupportedModesPhy1",
186 "List of modes supported by Phy1.",
190 .AddAttribute (
"SupportedModesPhy2",
191 "List of modes supported by Phy2.",
195 .AddAttribute (
"PerModelPhy1",
196 "Functor to calculate PER based on SINR and TxMode for Phy1.",
199 MakePointerChecker<UanPhyPer> ())
200 .AddAttribute (
"PerModelPhy2",
201 "Functor to calculate PER based on SINR and TxMode for Phy2.",
204 MakePointerChecker<UanPhyPer> ())
205 .AddAttribute (
"SinrModelPhy1",
206 "Functor to calculate SINR based on pkt arrivals and modes for Phy1.",
209 MakePointerChecker<UanPhyCalcSinr> ())
210 .AddAttribute (
"SinrModelPhy2",
211 "Functor to calculate SINR based on pkt arrivals and modes for Phy2.",
214 MakePointerChecker<UanPhyCalcSinr> ())
215 .AddTraceSource (
"RxOk",
216 "A packet was received successfully.",
218 "ns3::UanPhy::TracedCallback")
219 .AddTraceSource (
"RxError",
220 "A packet was received unsuccessfully.",
222 "ns3::UanPhy::TracedCallback")
223 .AddTraceSource (
"Tx",
224 "Packet transmission beginning.",
226 "ns3::UanPhy::TracedCallback")
258 m_phy1->SendPacket (pkt, modeNum);
265 m_phy2->SendPacket (pkt, modeNum -
m_phy1->GetNModes ());
271 m_phy1->RegisterListener (listener);
272 m_phy2->RegisterListener (listener);
285 m_phy1->SetReceiveOkCallback (cb);
286 m_phy2->SetReceiveOkCallback (cb);
292 m_phy1->SetReceiveErrorCallback (cb);
293 m_phy2->SetReceiveErrorCallback (cb);
300 m_phy1->SetTxPowerDb (txpwr);
301 m_phy2->SetTxPowerDb (txpwr);
307 m_phy1->SetTxPowerDb (txpwr);
312 m_phy2->SetTxPowerDb (txpwr);
318 m_phy1->SetRxThresholdDb (thresh);
319 m_phy2->SetRxThresholdDb (thresh);
324 m_phy1->SetCcaThresholdDb (thresh);
325 m_phy2->SetCcaThresholdDb (thresh);
331 m_phy1->SetCcaThresholdDb (thresh);
336 m_phy2->SetCcaThresholdDb (thresh);
343 NS_LOG_WARN (
"Warning: Dual Phy only returns TxPowerDb of Phy 1");
344 return m_phy1->GetTxPowerDb ();
350 return m_phy1->GetTxPowerDb ();
356 return m_phy2->GetTxPowerDb ();
362 return m_phy1->GetRxThresholdDb ();
368 NS_LOG_WARN (
"Dual Phy only returns CCAThreshold of Phy 1");
369 return m_phy1->GetCcaThresholdDb ();
374 return m_phy1->GetCcaThresholdDb ();
379 return m_phy2->GetCcaThresholdDb ();
385 return m_phy1->IsStateIdle ();
390 return m_phy2->IsStateIdle ();
396 return m_phy1->IsStateRx ();
402 return m_phy2->IsStateRx ();
408 return m_phy1->IsStateTx ();
414 return m_phy1->GetPacketRx ();
420 return m_phy2->GetPacketRx ();
426 return m_phy2->IsStateTx ();
431 return m_phy1->IsStateSleep () &&
m_phy2->IsStateSleep ();
436 return m_phy1->IsStateIdle () &&
m_phy2->IsStateIdle ();
456 return m_phy1->IsStateCcaBusy () ||
m_phy2->IsStateCcaBusy ();
461 return m_phy1->GetChannel ();
466 return m_phy1->GetDevice ();
477 m_phy1->SetDevice (device);
478 m_phy2->SetDevice (device);
494 m_phy1->NotifyIntChange ();
495 m_phy2->NotifyIntChange ();
501 m_phy1->SetTransducer (trans);
502 m_phy2->SetTransducer (trans);
507 NS_LOG_WARN (
"DualPhy Returning transducer of Phy1");
508 return m_phy1->GetTransducer ();
533 m_phy1->GetAttribute (
"SupportedModes", modeValue);
534 return modeValue.
Get ();
541 m_phy2->GetAttribute (
"SupportedModes", modeValue);
542 return modeValue.
Get ();
561 m_phy1->GetAttribute (
"PerModel", perValue);
569 m_phy2->GetAttribute (
"PerModel", perValue);
589 m_phy1->GetAttribute (
"SinrModel", sinrValue);
597 m_phy2->GetAttribute (
"SinrModel", sinrValue);
631 NS_FATAL_ERROR (
"GetPacketRx not valid for UanPhyDual. Must specify GetPhy1PacketRx or GetPhy2PacketRx");
632 return Create<Packet> ();
This class can be used to hold variables of floating point type such as 'double' or 'float'.
virtual void DoDispose(void)
Destructor implementation.
uint32_t PeekHeader(Header &header) const
Deserialize but does not remove the header from the internal buffer.
Hold objects of type Ptr<T>.
Hold variables of type string.
Simulation virtual time values and global simulation resolution.
a unique identifier for an interface.
TypeId SetParent(TypeId tid)
Set the parent TypeId.
Container for UanTxModes.
AttributeValue implementation for UanModesList.
UanModesList Get(void) const
The power delay profile returned by propagation models.
Default SINR model for UanPhyDual.
UanPhyCalcSinrDual()
Constructor.
static TypeId GetTypeId(void)
Register this type.
virtual ~UanPhyCalcSinrDual()
Destructor.
virtual double CalcSinrDb(Ptr< Packet > pkt, Time arrTime, double rxPowerDb, double ambNoiseDb, UanTxMode mode, UanPdp pdp, const UanTransducer::ArrivalList &arrivalList) const
Calculate the SINR value for a packet.
Class used for calculating SINR of packet in UanPhy.
double DbToKp(double db) const
Convert dB re 1 uPa to kilopascals.
double KpToDb(double kp) const
Convert kilopascals to dB re 1 uPa.
virtual void DoDispose()
Destructor implementation.
RxOkCallback m_recOkCb
Callback when packet received without errors.
virtual void SetTxPowerDb(double txpwr)
Set the transmit power.
Ptr< UanPhy > m_phy1
First Phy layer.
Ptr< UanPhyPer > GetPerModelPhy2(void) const
Get the error probability model.
void RxOkFromSubPhy(Ptr< Packet > pkt, double sinr, UanTxMode mode)
Handle callback and logger for packets received without error.
virtual Ptr< UanTransducer > GetTransducer(void)
Get the attached transducer.
virtual void SetEnergyModelCallback(DeviceEnergyModel::ChangeStateCallback callback)
Set the DeviceEnergyModel callback for UanPhy device.
virtual Ptr< UanChannel > GetChannel(void) const
Get the attached channel.
virtual uint32_t GetNModes(void)
Get the number of transmission modes supported by this Phy.
virtual void SetChannel(Ptr< UanChannel > channel)
Attach to a channel.
virtual void SendPacket(Ptr< Packet > pkt, uint32_t modeNum)
Send a packet using a specific transmission mode.
ns3::TracedCallback< Ptr< const Packet >, double, UanTxMode > m_rxErrLogger
A packet was received unsuccessfully.
virtual void SetReceiveErrorCallback(RxErrCallback cb)
Set the callback to be used when a packet is received with errors.
void SetPerModelPhy1(Ptr< UanPhyPer > per)
Set the error probability model.
UanModesList GetModesPhy2(void) const
Get the list of available modes.
Ptr< UanPhy > m_phy2
Second Phy layer.
virtual void SetReceiveOkCallback(RxOkCallback cb)
Set the callback to be used when a packet is received without error.
Ptr< Packet > GetPhy2PacketRx(void) const
Get the packet currently being received.
virtual double GetCcaThresholdDb(void)
Get the CCA threshold signal strength required to detect channel busy.
virtual void EnergyDepletionHandler(void)
Handle the energy depletion event.
void SetTxPowerDbPhy1(double txpwr)
Set the transmit power.
Ptr< Packet > GetPhy1PacketRx(void) const
Get the packet currently being received.
void SetModesPhy2(UanModesList modes)
Set the available modes.
virtual void Clear(void)
Clear all pointer references.
ns3::TracedCallback< Ptr< const Packet >, double, UanTxMode > m_txLogger
A packet was sent from this Phy.
Ptr< UanPhyCalcSinr > GetSinrModelPhy2(void) const
Get the SINR calculator.
virtual void NotifyTransStartTx(Ptr< Packet > packet, double txPowerDb, UanTxMode txMode)
Called when a transmission is beginning on the attached transducer.
virtual void SetTransducer(Ptr< UanTransducer > trans)
Attach a transducer to this Phy.
double GetCcaThresholdPhy2(void) const
Get the CCA threshold signal strength required to detect channel busy.
double GetTxPowerDbPhy2(void) const
Get the current transmit power, in dB.
double GetCcaThresholdPhy1(void) const
Get the CCA threshold signal strength required to detect channel busy.
Ptr< Packet > GetPacketRx(void) const
Get the packet currently being received.
virtual ~UanPhyDual()
Dummy destructor.
virtual void EnergyRechargeHandler(void)
Handle the energy recharge event.
Ptr< UanPhyPer > GetPerModelPhy1(void) const
Get the error probability model.
virtual double GetRxThresholdDb(void)
Get the minimum received signal strength required to receive a packet without errors.
void SetPerModelPhy2(Ptr< UanPhyPer > per)
Set the error probability model.
static TypeId GetTypeId()
Register this type.
void SetSinrModelPhy2(Ptr< UanPhyCalcSinr > calcSinr)
Set the SINR calculator.
virtual bool IsStateIdle(void)
virtual void SetDevice(Ptr< UanNetDevice > device)
Set the device hosting this Phy.
virtual UanTxMode GetMode(uint32_t n)
Get a specific transmission mode.
void SetModesPhy1(UanModesList modes)
Set the available modes.
virtual void StartRxPacket(Ptr< Packet > pkt, double rxPowerDb, UanTxMode txMode, UanPdp pdp)
Packet arriving from channel: i.e.
virtual bool IsStateSleep(void)
virtual bool IsStateCcaBusy(void)
virtual void SetMac(Ptr< UanMac > mac)
Set the MAC forwarding messages to this Phy.
UanModesList GetModesPhy1(void) const
Get the list of available modes.
virtual void RegisterListener(UanPhyListener *listener)
Register a UanPhyListener to be notified of common UanPhy events.
void RxErrFromSubPhy(Ptr< Packet > pkt, double sinr)
Handle callback and logger for packets received with error.
virtual bool IsStateTx(void)
Ptr< UanPhyCalcSinr > GetSinrModelPhy1(void) const
Get the SINR calculator.
virtual void SetRxThresholdDb(double thresh)
Set the minimum SINR threshold to receive a packet without errors.
RxErrCallback m_recErrCb
Callback when packet received with errors.
virtual void SetCcaThresholdDb(double thresh)
Set the threshold for detecting channel busy.
void SetCcaThresholdPhy1(double thresh)
Set the threshold for detecting channel busy.
int64_t AssignStreams(int64_t stream)
Assign a fixed random variable stream number to the random variables used by this model.
ns3::TracedCallback< Ptr< const Packet >, double, UanTxMode > m_rxOkLogger
A packet was received successfully.
void SetSinrModelPhy1(Ptr< UanPhyCalcSinr > calcSinr)
Set the SINR calculator.
void SetTxPowerDbPhy2(double txpwr)
Set the transmit power.
virtual double GetTxPowerDb(void)
Get the current transmit power, in dB.
virtual Ptr< UanNetDevice > GetDevice(void) const
Get the device hosting this Phy.
double GetTxPowerDbPhy1(void) const
Get the current transmit power, in dB.
virtual bool IsStateRx(void)
virtual void NotifyIntChange(void)
Called when there has been a change in the amount of interference this node is experiencing from othe...
void SetCcaThresholdPhy2(double thresh)
Set the threshold for detecting channel busy.
virtual bool IsStateBusy(void)
static UanModesList GetDefaultModes(void)
Get the default transmission modes.
Base class for UAN Phy models.
Interface for PHY event listener.
std::list< UanPacketArrival > ArrivalList
List of arriving packets overlapping in time.
Abstraction of packet modulation information.
@ OTHER
Unspecified/undefined.
std::string GetName(void) const
Get the mode name.
uint32_t GetCenterFreqHz(void) const
Get the transmission center frequency.
uint32_t GetBandwidthHz(void) const
Get the transmission signal bandwidth.
ModulationType GetModType(void) const
Get the modulation type of the mode.
Ptr< const AttributeAccessor > MakeDoubleAccessor(T1 a1)
Create an AttributeAccessor for a class data member, or a lone class get functor or set method.
Ptr< const AttributeAccessor > MakePointerAccessor(T1 a1)
Create an AttributeAccessor for a class data member, or a lone class get functor or set method.
Ptr< const AttributeChecker > MakeUanModesListChecker(void)
Ptr< const AttributeAccessor > MakeUanModesListAccessor(T1 a1)
Create an AttributeAccessor for a class data member, or a lone class get functor or set method.
#define NS_UNUSED(x)
Mark a local variable as unused.
#define NS_FATAL_ERROR(msg)
Report a fatal error with a message and terminate.
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
#define NS_LOG_DEBUG(msg)
Use NS_LOG to output a message of level LOG_DEBUG.
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by ",...
#define NS_LOG_WARN(msg)
Use NS_LOG to output a message of level LOG_WARN.
#define NS_OBJECT_ENSURE_REGISTERED(type)
Register an Object subclass with the TypeId system.
Time Now(void)
create an ns3::Time instance which contains the current simulation time.
Ptr< const TraceSourceAccessor > MakeTraceSourceAccessor(T a)
Create a TraceSourceAccessor which will control access to the underlying trace source.
Every class exported by the ns3 library is enclosed in the ns3 namespace.