21 #include <ns3/object.h>
22 #include <ns3/spectrum-interference.h>
23 #include <ns3/spectrum-error-model.h>
26 #include <ns3/simulator.h>
27 #include <ns3/packet.h>
29 #include <ns3/string.h>
32 #include <ns3/spectrum-model-ism2400MHz-res1MHz.h>
33 #include <ns3/spectrum-model-300kHz-300GHz-log.h>
34 #include <ns3/wifi-spectrum-value-helper.h>
35 #include <ns3/single-model-spectrum-channel.h>
36 #include <ns3/waveform-generator.h>
37 #include <ns3/spectrum-analyzer.h>
40 #include <ns3/friis-spectrum-propagation-loss.h>
41 #include <ns3/propagation-delay-model.h>
42 #include <ns3/spectrum-helper.h>
43 #include <ns3/adhoc-aloha-noack-ideal-phy-helper.h>
44 #include <ns3/mobility-helper.h>
45 #include <ns3/data-rate.h>
46 #include <ns3/uinteger.h>
47 #include <ns3/packet-socket-helper.h>
48 #include <ns3/packet-socket-address.h>
49 #include <ns3/packet-socket-client.h>
50 #include <ns3/config.h>
72 bool rateIsAchievable,
73 std::string channelType);
77 virtual void DoRun (
void);
78 static std::string
Name (std::string channelType,
double snrLinear, uint64_t phyRate);
89 std::ostringstream oss;
91 <<
" snr = " << snrLinear <<
" (linear), "
92 <<
" phyRate = " << phyRate <<
" bps";
99 bool rateIsAchievable,
100 std::string channelType)
102 m_snrLinear (snrLinear),
104 m_rateIsAchievable (rateIsAchievable),
105 m_channelType (channelType)
118 double txPowerW = 0.1;
121 const double k = 1.381e-23;
122 const double T = 290;
123 double noisePsdValue =
k * T;
125 double lossDb = 10 * std::log10 (lossLinear);
129 uint32_t numPkts = 200;
133 double testDuration = (numPkts *
pktSize * 8.0) / phyRate;
134 NS_LOG_INFO (
"test duration = " << std::fixed << testDuration);
141 positionAlloc->Add (Vector (0.0, 0.0, 0.0));
142 positionAlloc->Add (Vector (5.0, 0.0, 0.0));
143 mobility.SetPositionAllocator (positionAlloc);
144 mobility.SetMobilityModel (
"ns3::ConstantPositionMobilityModel");
161 uint32_t channelNumber = 1;
182 client->SetRemote (socket);
186 client->SetStartTime(
Seconds (0.0));
187 client->SetStopTime(
Seconds (testDuration));
193 Simulator::Stop (
Seconds (testDuration+0.000000001));
195 double throughputBps = (
g_rxBytes * 8.0) / testDuration;
197 std::clog.unsetf(std::ios_base::floatfield);
208 Simulator::Destroy ();
221 :
TestSuite (
"spectrum-ideal-phy", SYSTEM)
224 NS_LOG_INFO (
"creating SpectrumIdealPhyTestSuite");
226 for (
double snr = 0.01; snr <= 10 ; snr *= 2)
236 for (
double snr = 0.01; snr <= 10 ; snr *= 10)
virtual ~SpectrumIdealPhyTestCase()
virtual void DoRun(void)
Implementation to actually run this TestCase.
static std::string Name(std::string channelType, double snrLinear, uint64_t phyRate)
std::string m_channelType
SpectrumIdealPhyTestCase(double snrLinear, uint64_t phyRate, bool rateIsAchievable, std::string channelType)
SpectrumIdealPhyTestSuite()
create the AlohaNoackNetDevice
void SetPhyAttribute(std::string name, const AttributeValue &v)
void SetTxPowerSpectralDensity(Ptr< SpectrumValue > txPsd)
void SetNoisePowerSpectralDensity(Ptr< SpectrumValue > noisePsd)
void SetChannel(Ptr< SpectrumChannel > channel)
set the SpectrumChannel that will be used by SpectrumPhy instances created by this helper
NetDeviceContainer Install(NodeContainer c) const
Class for representing data rates.
AttributeValue implementation for DataRate.
Helper class used to assign positions and mobility models to nodes.
Keep track of the current position and velocity of an object.
holds a vector of ns3::NetDevice pointers
keep track of a set of node pointers.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
Ptr< Node > Get(uint32_t i) const
Get the Ptr<Node> stored in this container at a given index.
uint32_t AddApplication(Ptr< Application > application)
Associate an Application to this Node.
Ptr< T > GetObject(void) const
Get a pointer to the requested aggregated Object.
uint32_t GetSize(void) const
Returns the the size in bytes of the packet (including the zero-filled initial payload).
an address for a packet socket
void SetProtocol(uint16_t protocol)
Set the protocol.
void SetPhysicalAddress(const Address address)
Set the destination address.
void SetSingleDevice(uint32_t device)
Set the address to match only a specified NetDevice.
Give ns3::PacketSocket powers to ns3::Node.
void Install(Ptr< Node > node) const
Aggregate an instance of a ns3::PacketSocketFactory onto the provided node.
void SetChannel(std::string type, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
void SetPropagationDelay(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
void AddPropagationLoss(std::string name, std::string n0="", const AttributeValue &v0=EmptyAttributeValue(), std::string n1="", const AttributeValue &v1=EmptyAttributeValue(), std::string n2="", const AttributeValue &v2=EmptyAttributeValue(), std::string n3="", const AttributeValue &v3=EmptyAttributeValue(), std::string n4="", const AttributeValue &v4=EmptyAttributeValue(), std::string n5="", const AttributeValue &v5=EmptyAttributeValue(), std::string n6="", const AttributeValue &v6=EmptyAttributeValue(), std::string n7="", const AttributeValue &v7=EmptyAttributeValue())
Ptr< SpectrumChannel > Create(void) const
void AddTestCase(TestCase *testCase, TestDuration duration=QUICK)
Add an individual child TestCase to this test suite.
AttributeValue implementation for Time.
Hold an unsigned integer type.
Implements Wifi SpectrumValue for the 2.4 GHz ISM band only, with a 5 MHz spectrum resolution.
virtual Ptr< SpectrumValue > CreateConstant(double psd)
Creates a SpectrumValue instance with a constant value for all frequencies.
virtual Ptr< SpectrumValue > CreateTxPowerSpectralDensity(double txPower, uint8_t channel)
Creates a SpectrumValue instance that represents the TX Power Spectral Density of a wifi device corre...
void Connect(std::string path, const CallbackBase &cb)
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
#define NS_LOG_FUNCTION(parameters)
If log level LOG_FUNCTION is enabled, this macro will output all input parameters separated by ",...
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO.
#define NS_TEST_ASSERT_MSG_EQ(actual, limit, msg)
Test that an actual and expected (limit) value are equal and report and abort if not.
#define NS_TEST_ASSERT_MSG_EQ_TOL(actual, limit, tol, msg)
Test that actual and expected (limit) values are equal to plus or minus some tolerance and report and...
Time Seconds(double value)
Construct a Time in the indicated unit.
Every class exported by the ns3 library is enclosed in the ns3 namespace.
Callback< R, Ts... > MakeCallback(R(T::*memPtr)(Ts...), OBJ objPtr)
Build Callbacks for class method members which take varying numbers of arguments and potentially retu...
void PhyRxEndOkTrace(std::string context, Ptr< const Packet > p)
static SpectrumIdealPhyTestSuite g_spectrumIdealPhyTestSuite
static uint64_t g_rxBytes
static double g_bandwidth
static std::string Name(std::string str, uint32_t totalStreamSize, uint32_t sourceWriteSize, uint32_t serverReadSize, uint32_t serverWriteSize, uint32_t sourceReadSize, bool useIpv6)
uint32_t pktSize
packet size used for the simulation (in bytes)