23 #include "ns3/abort.h"
25 #include "ns3/pcap-file.h"
26 #include "ns3/config.h"
27 #include "ns3/string.h"
28 #include "ns3/uinteger.h"
29 #include "ns3/boolean.h"
30 #include "ns3/data-rate.h"
31 #include "ns3/inet-socket-address.h"
32 #include "ns3/point-to-point-helper.h"
33 #include "ns3/internet-stack-helper.h"
34 #include "ns3/traffic-control-helper.h"
35 #include "ns3/ipv4-global-routing-helper.h"
36 #include "ns3/ipv4-address-helper.h"
37 #include "ns3/packet-sink-helper.h"
38 #include "ns3/tcp-socket-factory.h"
39 #include "ns3/node-container.h"
40 #include "ns3/simulator.h"
41 #include "ns3/error-model.h"
42 #include "ns3/pointer.h"
44 #include "ns3/tcp-header.h"
80 virtual void DoSetup (
void);
81 virtual void DoRun (
void);
82 virtual void DoTeardown (
void);
104 :
TestCase (
"Check the operation of the TCP state machine for several cases"),
106 m_totalTxBytes (20000),
107 m_currentTxBytes (0),
116 :
TestCase (
"Check the operation of the TCP state machine for several cases"),
117 m_testCase (testCase),
118 m_totalTxBytes (20000),
119 m_currentTxBytes (0),
134 std::ostringstream oss;
135 oss <<
"ns3tcp-state" <<
m_testCase <<
"-response-vectors.pcap";
148 "Wrong response vectors in directory: opening " <<
196 uint32_t (tMicroSeconds % 1000000),
206 uint32_t tsSec, tsUsec, inclLen, origLen, readLen;
207 m_pcapFile.
Read (expectedBuffer,
sizeof(expectedBuffer), tsSec, tsUsec, inclLen, origLen, readLen);
211 uint8_t *actual =
new uint8_t[readLen];
212 received->
CopyData (actual, readLen);
214 int result = memcmp (actual, expectedBuffer, readLen);
216 TcpHeader expectedHeader, receivedHeader;
217 Ptr<Packet> expected = Create<Packet> (expectedBuffer, readLen);
222 NS_LOG_DEBUG (
"Expected " << expectedHeader <<
" received: " << receivedHeader);
245 uint32_t toWrite = 1040 - dataOffset;
248 toWrite =
std::min (toWrite, txAvail);
255 std::clog <<
"Submitting "
256 << toWrite <<
" bytes to TCP socket" << std::endl;
258 int amountSent = localSocket->
Send (0, toWrite, 0);
266 std::clog <<
"Close socket at "
270 localSocket->
Close ();
282 std::clog <<
"Starting flow at time "
305 std::string tcpModel (
"ns3::TcpNewReno");
354 ipv4.
SetBase (
"10.1.3.0",
"255.255.255.0");
356 ipv4.
SetBase (
"10.1.2.0",
"255.255.255.0");
360 Ipv4GlobalRoutingHelper::PopulateRoutingTables ();
367 uint16_t servPort = 50000;
377 TcpSocketFactory::GetTypeId ());
378 localSocket->
Bind ();
380 localSocket, ipInterfs.
GetAddress (1), servPort);
392 std::list<uint32_t> dropListN0;
393 std::list<uint32_t> dropListN1;
394 std::string caseDescription;
399 caseDescription =
"Verify connection establishment";
403 caseDescription =
"Verify a bigger (100 pkts) transfer: Sliding window operation, etc.";
407 caseDescription =
"Survive a SYN lost";
408 dropListN0.push_back (0);
412 caseDescription =
"Survive a SYN+ACK lost";
413 dropListN1.push_back (0);
417 caseDescription =
"Survive a ACK (last packet in 3-way handshake) lost";
418 dropListN0.push_back (1);
422 caseDescription =
"Immediate FIN upon SYN_RCVD";
424 dropListN0.push_back (1);
425 Simulator::Schedule (
Seconds (0.002), &Socket::Close, localSocket);
429 caseDescription =
"Simulated simultaneous close";
430 dropListN1.push_back (5);
434 caseDescription =
"FIN check 1: Loss of initiator's FIN. Wait until app close";
436 dropListN0.push_back (7);
437 Simulator::Schedule (
Seconds (0.04), &Socket::Close, localSocket);
441 caseDescription =
"FIN check 2: Loss responder's FIN. FIN will be resent after last ack timeout";
442 dropListN1.push_back (6);
445 NS_FATAL_ERROR (
"Program fatal error: specified test case not supported: "
451 errN0->SetList (dropListN0);
452 dev0.
Get (1)->SetAttribute (
"ReceiveErrorModel",
PointerValue (errN0));
455 errN1->SetList (dropListN1);
456 dev1.
Get (0)->SetAttribute (
"ReceiveErrorModel",
PointerValue (errN1));
458 std::ostringstream oss;
459 oss <<
"tcp-state" <<
m_testCase <<
"-test-case";
469 *(osw->
GetStream ()) << std::setprecision (9) << std::fixed;
472 std::clog << std::endl <<
"Running TCP test-case " <<
m_testCase <<
": "
473 << caseDescription << std::endl;
478 Simulator::Stop (
Seconds (1000));
480 Simulator::Destroy ();
493 SetDataDir (
"src/test/ns3tcp/response-vectors");
494 Packet::EnablePrinting ();
void StartFlow(Ptr< Socket > localSocket, Ipv4Address servAddress, uint16_t servPort)
void Ipv4L3Tx(std::string context, Ptr< const Packet > packet, Ptr< Ipv4 > ipv4, uint32_t interface)
uint32_t m_currentTxBytes
std::string m_pcapFilename
virtual void DoRun(void)
Implementation to actually run this TestCase.
virtual void DoTeardown(void)
Implementation to do any local setup required for this TestCase.
void Ipv4L3Rx(std::string context, Ptr< const Packet > packet, Ptr< Ipv4 > ipv4, uint32_t interface)
virtual ~Ns3TcpStateTestCase()
virtual void DoSetup(void)
Implementation to do any local setup required for this TestCase.
void WriteUntilBufferFull(Ptr< Socket > localSocket, uint32_t txSpace)
holds a vector of ns3::Application pointers.
void Start(Time start)
Arrange for all of the Applications in this container to Start() at the Time given as a parameter.
void Stop(Time stop)
Arrange for all of the Applications in this container to Stop() at the Time given as a parameter.
void EnableAsciiAll(std::string prefix)
Enable ascii trace output on each device (which is of the appropriate type) in the set of all nodes c...
AttributeValue implementation for Boolean.
Class for representing data rates.
AttributeValue implementation for DataRate.
aggregate IP/TCP/UDP functionality to existing Nodes.
void InstallAll(void) const
Aggregate IPv4, IPv6, UDP, and TCP stacks to all nodes in the simulation.
A helper class to make life easier while doing simple IPv4 address assignment in scripts.
void SetBase(Ipv4Address network, Ipv4Mask mask, Ipv4Address base="0.0.0.1")
Set the base network number, network mask and base address.
Ipv4InterfaceContainer Assign(const NetDeviceContainer &c)
Assign IP addresses to the net devices specified in the container based on the current network prefix...
Ipv4 addresses are stored in host order in this class.
holds a vector of std::pair of Ptr<Ipv4> and interface index.
Ipv4Address GetAddress(uint32_t i, uint32_t j=0) const
holds a vector of ns3::NetDevice pointers
Ptr< NetDevice > Get(uint32_t i) const
Get the Ptr<NetDevice> stored in this container at a given index.
keep track of a set of node pointers.
void Create(uint32_t n)
Create n nodes and append pointers to them to the end of this NodeContainer.
void Add(NodeContainer other)
Append the contents of another NodeContainer to the end of this container.
Ptr< Node > Get(uint32_t i) const
Get the Ptr<Node> stored in this container at a given index.
std::ostream * GetStream(void)
Return a pointer to an ostream previously set in the wrapper.
uint32_t RemoveHeader(Header &header)
Deserialize and remove the header from the internal buffer.
uint32_t CopyData(uint8_t *buffer, uint32_t size) const
Copy the packet contents to a byte buffer.
Ptr< Packet > Copy(void) const
performs a COW copy of the packet.
A helper to make it easier to instantiate an ns3::PacketSinkApplication on a set of nodes.
A class representing a pcap file.
void Open(std::string const &filename, std::ios::openmode mode)
Create a new pcap file or open an existing pcap file.
void Read(uint8_t *const data, uint32_t maxBytes, uint32_t &tsSec, uint32_t &tsUsec, uint32_t &inclLen, uint32_t &origLen, uint32_t &readLen)
Read next packet from file.
void Write(uint32_t tsSec, uint32_t tsUsec, uint8_t const *const data, uint32_t totalLen)
Write next packet to file.
void Init(uint32_t dataLinkType, uint32_t snapLen=SNAPLEN_DEFAULT, int32_t timeZoneCorrection=ZONE_DEFAULT, bool swapMode=false, bool nanosecMode=false)
Initialize the pcap file associated with this object.
uint32_t GetDataLinkType(void)
Returns the data link type field of the pcap file as defined by the network field in the pcap global ...
void Close(void)
Close the underlying file.
void EnablePcapAll(std::string prefix, bool promiscuous=false)
Enable pcap output on each device (which is of the appropriate type) in the set of all nodes created ...
Build a set of PointToPointNetDevice objects.
void SetDeviceAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each NetDevice created by the helper.
void SetChannelAttribute(std::string name, const AttributeValue &value)
Set an attribute value to be propagated to each Channel created by the helper.
NetDeviceContainer Install(NodeContainer c)
Hold objects of type Ptr<T>.
virtual int Send(Ptr< Packet > p, uint32_t flags)=0
Send data (or dummy data) to the remote host.
void SetSendCallback(Callback< void, Ptr< Socket >, uint32_t > sendCb)
Notify application when space in transmit buffer is added.
virtual int Connect(const Address &address)=0
Initiate a connection to a remote host.
virtual int Close(void)=0
Close a socket.
virtual int Bind(const Address &address)=0
Allocate a local endpoint for this socket.
virtual uint32_t GetTxAvailable(void) const =0
Returns the number of bytes which can be sent in a single call to Send.
Hold variables of type string.
bool IsStatusSuccess(void) const
Check if all tests passed.
std::string CreateDataDirFilename(std::string filename)
Construct the full path to a file in the data directory.
void AddTestCase(TestCase *testCase, TestDuration duration=QUICK)
Add an individual child TestCase to this test suite.
void SetDataDir(std::string directory)
Set the data directory where reference trace files can be found.
Simulation virtual time values and global simulation resolution.
int64_t GetMicroSeconds(void) const
Get an approximation of the time stored in this instance in the indicated unit.
double GetSeconds(void) const
Get an approximation of the time stored in this instance in the indicated unit.
AttributeValue implementation for Time.
Build a set of QueueDisc objects.
QueueDiscContainer Install(NetDeviceContainer c)
uint16_t SetRootQueueDisc(const std::string &type, Args &&... args)
Helper function used to set a root queue disc of the given type and with the given attributes.
Hold an unsigned integer type.
#define NS_ASSERT(condition)
At runtime, in debugging builds, if this condition is not true, the program prints the source file,...
void SetDefault(std::string name, const AttributeValue &value)
void Connect(std::string path, const CallbackBase &cb)
#define NS_ABORT_MSG_UNLESS(cond, msg)
Abnormal program termination if a condition is false, with a message.
#define NS_FATAL_ERROR(msg)
Report a fatal error with a message and terminate.
#define NS_LOG_COMPONENT_DEFINE(name)
Define a Log component with a specific name.
#define NS_LOG_DEBUG(msg)
Use NS_LOG to output a message of level LOG_DEBUG.
#define NS_LOG_INFO(msg)
Use NS_LOG to output a message of level LOG_INFO.
Time Now(void)
create an ns3::Time instance which contains the current simulation time.
#define NS_TEST_EXPECT_MSG_EQ(actual, limit, msg)
Test that an actual and expected (limit) value are equal and report if not.
Time Seconds(double value)
Construct a Time in the indicated unit.
Every class exported by the ns3 library is enclosed in the ns3 namespace.
@ LOG_PREFIX_FUNC
Prefix all trace prints with function.
@ LOG_LEVEL_DEBUG
LOG_DEBUG and above.
@ LOG_LEVEL_INFO
LOG_INFO and above.
void LogComponentEnable(char const *name, enum LogLevel level)
Enable the logging output associated with that log component.
void LogComponentEnableAll(enum LogLevel level)
Enable the logging output for all registered log components.
Callback< R, Ts... > MakeCallback(R(T::*memPtr)(Ts...), OBJ objPtr)
Build Callbacks for class method members which take varying numbers of arguments and potentially retu...
const uint32_t PCAP_LINK_TYPE
static Ns3TcpStateTestSuite ns3TcpLossTestSuite
const uint32_t PCAP_SNAPLEN
void WriteUntilBufferFull(Ptr< Socket >, uint32_t)
void StartFlow(Ptr< Socket >, Ipv4Address, uint16_t)