21 #ifndef INTERFERENCE_HELPER_H
22 #define INTERFERENCE_HELPER_H
221 uint16_t staId, std::pair<Time, Time> relativeMpduStartStop) const;
232 double
CalculateSnr (Ptr<Event> event, uint16_t channelWidth, uint8_t nss, WifiSpectrumBand band) const;
245 WifiPpduField header) const;
268 void
UpdateEvent (Ptr<Event> event, RxPowerWattPerChannelBand rxPower);
282 double
CalculateSnr (double signal, double noiseInterference, uint16_t channelWidth, uint8_t nss) const;
295 double
CalculateChunkSuccessRate (double snir, Time duration, WifiMode mode, const WifiTxVector& txVector, WifiPpduField field) const;
329 double GetPower (
void)
const;
335 void AddPower (
double power);
392 uint16_t staId, std::pair<Time, Time>
window)
const;
handles interference calculations
RxPowerWattPerChannelBand GetRxPowerWPerBand(void) const
Return the received power (W) for all bands.
WifiTxVector m_txVector
TXVECTOR.
Time m_startTime
start time
Ptr< const WifiPpdu > m_ppdu
PPDU.
void UpdateRxPowerW(RxPowerWattPerChannelBand rxPower)
Update the received power (W) for all bands, i.e.
const WifiTxVector & GetTxVector(void) const
Return the TXVECTOR of the PPDU.
Time GetDuration(void) const
Return the duration of the signal.
Ptr< const WifiPpdu > GetPpdu(void) const
Return the PPDU.
RxPowerWattPerChannelBand m_rxPowerW
received power in watts per band
Time GetStartTime(void) const
Return the start time of the signal.
Event(Ptr< const WifiPpdu > ppdu, const WifiTxVector &txVector, Time duration, RxPowerWattPerChannelBand rxPower)
Create an Event with the given parameters.
double GetRxPowerW(void) const
Return the total received power (W).
Time GetEndTime(void) const
Return the end time of the signal.
Noise and Interference (thus Ni) event.
Ptr< Event > m_event
event
double m_power
power in watts
handles interference calculations
void SetNoiseFigure(double value)
Set the noise figure.
double m_noiseFigure
noise figure (linear)
NiChanges::iterator AddNiChangeEvent(Time moment, NiChange change, WifiSpectrumBand band)
Add NiChange to the list at the appropriate position and return the iterator of the new event.
bool m_rxing
flag whether it is in receiving state
void EraseEvents(void)
Erase all events.
std::map< WifiSpectrumBand, NiChanges > NiChangesPerBand
Map of NiChanges per band.
void UpdateEvent(Ptr< Event > event, RxPowerWattPerChannelBand rxPower)
Update event to scale its received power (W) per band.
uint8_t m_numRxAntennas
the number of RX antennas in the corresponding receiver
Ptr< Event > Add(Ptr< const WifiPpdu > ppdu, const WifiTxVector &txVector, Time duration, RxPowerWattPerChannelBand rxPower, bool isStartOfdmaRxing=false)
Add the PPDU-related signal to interference helper.
void NotifyRxEnd(Time endTime)
Notify that RX has ended.
double CalculateNoiseInterferenceW(Ptr< Event > event, NiChangesPerBand *nis, WifiSpectrumBand band) const
Calculate noise and interference power in W.
void SetErrorRateModel(const Ptr< ErrorRateModel > rate)
Set the error rate model for this interference helper.
std::multimap< Time, NiChange > NiChanges
typedef for a multimap of NiChange
Time GetEnergyDuration(double energyW, WifiSpectrumBand band)
NiChanges::iterator GetPreviousPosition(Time moment, WifiSpectrumBand band)
Returns an iterator to the last NiChange that is before than moment.
double CalculatePayloadChunkSuccessRate(double snir, Time duration, const WifiTxVector &txVector, uint16_t staId=SU_STA_ID) const
Calculate the success rate of the payload chunk given the SINR, duration, and TXVECTOR.
void AddForeignSignal(Time duration, RxPowerWattPerChannelBand rxPower)
Add a non-Wifi signal to interference helper.
Ptr< ErrorRateModel > m_errorRateModel
error rate model
void AppendEvent(Ptr< Event > event, bool isStartOfdmaRxing)
Append the given Event.
NiChanges::iterator GetNextPosition(Time moment, WifiSpectrumBand band)
Returns an iterator to the first NiChange that is later than moment.
Ptr< ErrorRateModel > GetErrorRateModel(void) const
Return the error rate model.
void NotifyRxStart()
Notify that RX has started.
double CalculateSnr(Ptr< Event > event, uint16_t channelWidth, uint8_t nss, WifiSpectrumBand band) const
Calculate the SNIR for the event (starting from now until the event end).
struct PhyEntity::SnrPer CalculatePhyHeaderSnrPer(Ptr< Event > event, uint16_t channelWidth, WifiSpectrumBand band, WifiPpduField header) const
Calculate the SNIR at the start of the PHY header and accumulate all SNIR changes in the SNIR vector.
double CalculateChunkSuccessRate(double snir, Time duration, WifiMode mode, const WifiTxVector &txVector, WifiPpduField field) const
Calculate the success rate of the chunk given the SINR, duration, and TXVECTOR.
struct PhyEntity::SnrPer CalculatePayloadSnrPer(Ptr< Event > event, uint16_t channelWidth, WifiSpectrumBand band, uint16_t staId, std::pair< Time, Time > relativeMpduStartStop) const
Calculate the SNIR at the start of the payload and accumulate all SNIR changes in the SNIR vector for...
double CalculatePayloadPer(Ptr< const Event > event, uint16_t channelWidth, NiChangesPerBand *nis, WifiSpectrumBand band, uint16_t staId, std::pair< Time, Time > window) const
Calculate the error rate of the given PHY payload only in the provided time window (thus enabling per...
void RemoveBands(void)
Remove the frequency bands.
double CalculatePhyHeaderSectionPsr(Ptr< const Event > event, NiChangesPerBand *nis, uint16_t channelWidth, WifiSpectrumBand band, PhyEntity::PhyHeaderSections phyHeaderSections) const
Calculate the success rate of the PHY header sections for the provided event.
void SetNumberOfReceiveAntennas(uint8_t rx)
Set the number of RX antennas in the receiver corresponding to this interference helper.
void AddBand(WifiSpectrumBand band)
Add a frequency band.
double CalculatePhyHeaderPer(Ptr< const Event > event, NiChangesPerBand *nis, uint16_t channelWidth, WifiSpectrumBand band, WifiPpduField header) const
Calculate the error rate of the PHY header.
NiChangesPerBand m_niChangesPerBand
NI Changes for each band.
std::map< WifiSpectrumBand, double > m_firstPowerPerBand
first power of each band in watts
std::map< WifiPpduField, PhyHeaderChunkInfo > PhyHeaderSections
A map of PhyHeaderChunkInfo elements per PPDU field.
Smart pointer class similar to boost::intrusive_ptr.
A template-based reference counting class.
Simulation virtual time values and global simulation resolution.
This class mimics the TXVECTOR which is to be passed to the PHY in order to define the parameters whi...
WifiPpduField
The type of PPDU field (grouped for convenience)
Every class exported by the ns3 library is enclosed in the ns3 namespace.
std::pair< uint32_t, uint32_t > WifiSpectrumBand
typedef for a pair of start and stop sub-band indexes
std::map< WifiSpectrumBand, double > RxPowerWattPerChannelBand
A map of the received power (Watts) for each band.
std::ostream & operator<<(std::ostream &os, const Angles &a)
A struct for both SNR and PER.